description | wetted parts | ranges | options and accessories | technical notes and
manuals | request info
S-111, S-112, & S-114 Flo-Meters 
Description
For liquid flow metering with integrated rate display, the S-Series Flo-Meters have been
setting the pace. Their advanced Pelton-turbine design provides large turn-down
ratios, fast response, and repeatable accuracy. Combined with an affordable price,
you cannot beat their value. A 0-5VDC analog output is standard.
If you require an inexpensive plastic flow meter to measure flow rates, the S-111 Flo-Meter is the answer. Including an analog 0-5VDC output and a 3 1/2 digit display of flow rate in engineering units, these flow meters are perfect for any laboratory or test facility.
For higher pressure applications or
where metal may be required, the Model S-112 & S-114 may be the solution. Both are
rated to 500 psig. The S-112 is made from brass, whereas the S-114 features a stainless
steel flow body. The S-114 also features enhanced ±1% accuracy for critical applications,
and comes standard with an NIST certificate.
Wetted Parts
Either a cable assembly or power adapter is required for operation (see below).
S-111: Ryton®, acetal, sapphire, glass, epoxy, Viton®
O-rings and acetal fittings standard.
S-112: Brass, Ryton®, acetal, sapphire, glass, epoxy, Viton®
O-rings and brass fittings standard.
S-114: 316L stainless steel, Ryton®, acetal, sapphire, glass, epoxy,
Viton® O-rings and SS fittings standard.
EPDM O-rings are available instead of Viton® on any unit at an added
cost - use suffix "Q".
Ranges
Dimensions (not including fittings): 1.88"x3.00"x1.75"
| S-111 | S-112 | S-114 | Flow Range | Max. Pressure Drop | Standard Fittings |
| S-111-3 | S-112-3 | S-114-3 | 13-100 mL/minute | 10 psi | 1/8" tube |
| S-111-4 | S-112-4 | S-114-4 | 20-200 mL/minute | 10 psi | 1/4" tube |
| S-111-5 | S-112-5 | S-114-5 | 50-500 mL/minute | 10 psi | 1/4" tube |
| S-111-6 | S-112-6 | S-114-6 | 100-1000 mL/minute | 6 psi | 1/4" tube |
| S-111-7 | S-112-7 | S-114-7 | 0.2-2.0 L/minute | 10 psi | 1/4" tube |
| S-111-8 | S-112-8 | S-114-8 | 0.4-5.0 L/minute | 10 psi | 3/8" tube |
| S-111-9 | S-112-9 | S-114-9 | 1.0-10.0 L/minute | 10 psi | 3/8" tube |
| S-111-5G | S-112-5G | S-114-5G | 1-10 GPH | 12 psi | 1/4" tube |
| S-111-8G | S-112-8G | S-114-8G | 10-100 GPH | 12 psi | 3/8" tube |
For increased accuracy and a NIST Calibration Certificate, order precision models with the "P" suffix (ex., S-111-8GP)
100-17 Cable Assembly - 30 inch, 3-wire cable with pigtail leads.
Connections for 12VDC power and signal.
S-PS-08 Power Adapter - 115 VAC(USA) power adapter. Plugs into standard
wall outlet, with signal output leads.
S-PS-18 Power Adapter - 230 VAC(Eur) power adapter. Plugs into standard
wall outlet, with signal output leads.
110-00-17 Base (S-111 only) - Allows the S-111 to stand by itself. Includes
mounting hardware.
Download
the S-Series Sales Brochure (PDF, 3.73 MB
Request Information
E-mail request form
Ryton - Reg TM
Phillips 66 Petroleum Co.
Viton - Reg TM E.I. Dupont de Nemours Co.