back
Overview (top)
ADI’s Micro Dia-Vac® diaphragm gaseous sampling pumps are completely self
contained and may be used for either built in or portable applications. These Dia-Vac®
pumps are ideal for use in laboratories, industrial plants, engineering research
facilities and hospitals for gaseous sampling/analysis, vacuum pickup, environmental
safety monitoring, pollution control, etc.
The Micro Dia-Vac® gaseous diaphragm pressure/vacuum sampling pumps are available
in single or double head configuration, heated heads (up to 400°F) elevated head or DC
versions. The Micro Dia-Vac® motor is available in a single dual voltage 115V/ 230V and
dual cycle 50/60 Hz operation. The single stage is also available with brush and brushless
12-24V DC motors. The entire line of the Micro Dia-Vac® pumps are CE approved.
To prevent air contamination, the diaphragms used in the Micro Dia-Vac® are made of 100% Teflon®. Head selections are available in aluminum, 316 stainless steel, Teflon coated Aluminum, Teflon coated 316 S/S or in our all NEW 100% Kynar head. With the Dia-Vac® pumps, no oil, graphite or other potentially contaminating lubricants will come in contact with the air stream.
Features: (top)
- Dual Voltage 115/220 volt, 50-60 Hz motor
- CE approved
- Standard orders ship within 2-3 days, Emergency 24 hours shipments available
- *NEW* Brush and brushless 12-24 volt (.3-.5 amps) DC motors available
- Corrosion resistant options including the all *NEW* Kynar head
- Complete field serviceability
- Continuous operation
- Pump head & diaphragms made of chemically inert material to prevent sample contamination
- Optional eccentric sizing for greater flexibility to system performance requirements
- Inlet and outlet 1/8" NPT
- Oversized bearings and motor shaft
- Exceptionally quiet at all pressures
- Low maintenance with minimal noise vibration
- No risk of damage even when inlet or outlet becomes blocked
- Will operate in any position if motor is properly supported
- ADI will customize the Micro Dia-Vac® to meet your specific application
Micro Dia-Vac® Heated Head Pump (top)
Self-contained heads eliminate cold spots in sample systems. These models come complete with a Type K thermo-couple and two 50 watt cartridge heaters and require an optional digital temperature controller to prevent overheating (kit #11030). The maximum operating temperature of heated heads is 400° F (200° C) with all Teflon® diaphragms.
Micro Dia-Vac® Elevated Head Sample Pumps (top)
Ideal for stack emission analysis. They are specifically designed for tough duty in high temperature, (200° C or 400° F). This configuration allows for the head to be inserted into a heated box with the motor remaining in an ambient environment.
Micro Dia-Vac® Pump Performance (top)
For Pump Performance specifications, please look at our Micro
Dia-Vac Performance Sheet.
Product Images & Drawings (top)
Please note: In order to view the Acrobat
Portable Document Format (PDF) versions of our parts diagrams, you must have
Adobe's Acrobat Reader v5.0 or later installed. If you do not have Acrobat or Acrobat
Reader, click
here to Get Acrobat Now!
)
)
)
)
)
)
)
Copyright ©1999 Air Dimensions, Inc.
Dia-Vac® is a registered trademark of Air Dimensions, Inc.
Teflon® is a registered trademarks of E. I. du Pont de Nemours and
Company, Viton® is a registered trademark of Dupont Dow Elastomers