PC-2 AIR PARTICLE ANALYZER
An aerosol particle mass concentration and size distribution analyzer that gives
you data instantly.
To view picture of PC2 with optional chamber for use with nebulizer visit: http://techtrans.jpl.nasa.gov/success/stories/calmeas.html
or click here.
MICROANALYSIS PARTICLE SAMPLER
MPS-4G1 collects particles for direct Scanning Electron Microscopy and
Energy Dispersive X-ray analysis. It helps you find out what the particles are and
where they come from.
AS-6
CASCADE IMPACTOR FOR AEROSOL DRUG MEASUREMENTS
This is a cascade impactor designed for the pharmaceutical scientist.
Its flow rate and size range conform to the 1989 FDA guidelines for testing metaproterenol
sulfate and albuterol inhalation ae5rosols. It operates at a flow rate of 12.5
liters/minute and has six impactor stages with cut-points of >16 - 8 - 4 - 2 - 1
- 0.5 microns. A 0.3 micron after-filter is provided to catch particles less than
0.5 microns.
Its mechanical design was done with meticulous care and with a singular objective:
to provide you with an up-to-date and modern research tool.
It embodies technologies and experiences our company accumulated over fifteen years in
designing and manufacturing cascade impactors for the aerosol research community.